Slip Indicator Light Remains ON: Procedure

1. Check if the CAN communication system DTC is output. Refer to DIAGNOSIS SYSTEM .
   RESULT
   
   

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

B → See step   6 

A: Go to next step 

1. Check if the skid control ECU connector is securely connected.

   OK

   The connector is securely connected.

NG → CONNECT CONNECTOR TO ECU CORRECTLY 

OK: Go to next step 

1. Check the battery voltage.

   Standard voltage

   11 to 14 V

NG → See step   7 

OK: Go to next step 

1. Turn the ignition switch off.
2. Perform the Active Test of the combination meter using the Techstream. Refer to DATA LIST / ACTIVE TEST .
3. Check the combination meter.

   OK

   The slip indicator light turns ON or OFF in accordance with the Techstream.

NG → See step   8 

OK → See step   5