Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Scion >> 2009 >> xB Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2AZ-FE Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
      Fig 1: Locating Mass Air Flow Meter Screws
      G05386948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals