Camshaft Timing Oil Control Valve Assembly: Removal

REMOVE WINDSHIELD WIPER ARM COVER (See REMOVAL )
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH (See REMOVAL )
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH (See REMOVAL )
REMOVE HOOD TO COWL TOP SEAL (See REMOVAL )
REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
REMOVE COWL TOP VENTILATOR LOUVER LH (See REMOVAL )
REMOVE FRONT WIPER MOTOR AND LINK (See REMOVAL )
REMOVE OUTER COWL TOP PANEL
1. Separate the wire harness.
  
  Fig 1: Locating Wire Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 10 bolts and remove the cowl top panel outer.
Fig 2: Locating Cowl Top Panel Outer Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Remove the bolt and remove the vacuum hose clamp.
  
  Fig 3: Locating Vacuum Hose Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the oil control valve connector.
3. Remove the bolt and oil control valve.
  
  Fig 4: Locating Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002