Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2010 >> Vue XR, 2.4 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS COMPANY
  1. Lubricate the CKP sensor O-ring seal with clean engine oil.
  2. Install the CKP sensor.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the CKP sensor bolt.

    Tighten 

    Tighten the bolt to 10 N.m (89 lb in).

    4. Fig 2: View Of Starter And Engine Electrical Connectors
    GM1809558Courtesy of GENERAL MOTORS COMPANY
  4. Connect the engine wiring harness electrical connector (1) to the CKP sensor.
  5. Install the starter motor. Refer to Starter Replacement (LE5/LAT) .
scientia non olet · About Mike's Workshop Manuals