Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2010 >> Vue XR, 2.4 1 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6T75) >> Replace and Program Control Module

Replace and Program Control Module

To program a replacement transmission control module (TCM), perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select Transmission Control Module - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select Transmission Control Module - Setup and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  6. With a scan tool, perform the Reset Transmission Adapts. Refer to Reset Transmission Adapts .
  7. With a scan tool, reset the Transmission Oil Life Remaining back to the original percentage recorded before the control module was replaced, if available.
scientia non olet · About Mike's Workshop Manuals