Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0562 >> Circuit/System Verification

Circuit/System Verification

  1. Engine running measure and record the voltage at the battery terminals. Verify that the battery voltage is 12.6-15.5 V.
  2. Observe the scan tool ECM Ignition 1 Signal parameter. Verify that the scan tool ECM Battery Voltage parameter is within 2 V of the battery terminal voltage.
scientia non olet · About Mike's Workshop Manuals