Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls And Fuel - 2.4L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Tank Wiring Harness Electrical Connector
    GM1885236Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (AWD)  or Fuel Tank Replacement (FWD) .
  2. Disconnect the fuel tank wiring harness electrical connector (1) from the fuel tank pressure sensor.
    3. Fig 2: Fuel Tank Pressure Sensor
    GM1885238Courtesy of GENERAL MOTORS CORP.
  3. Disengage the retaining tab (1) securing the fuel tank pressure sensor.
  4. Carefully lift and remove the fuel tank pressure sensor (2) from the fuel pump module.
scientia non olet · About Mike's Workshop Manuals