Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of BPMV & Bracket

Courtesy of GENERAL MOTORS CORP.

Install the bracket (1) to the BPMV.

NOTE: Refer to Fastener Notice .

Fig 2: Identifying BPMV Bolt

Courtesy of GENERAL MOTORS CORP.

Install the BPMV bolt (1).
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 3: View Of BPMV & Bracket Assembly

Courtesy of GENERAL MOTORS CORP.

Carefully position the BPMV and bracket assembly to the wheel house.
Install the BPMV bracket nuts (1).
Tighten: Tighten the bolt to 10 N.m (89 lb in).
Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .