Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement (With RPO LAT) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of BPMV & Bracket Assembly
    GM1961235Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Remove the brake pressure modulator valve (BPMV) bracket nuts (1).
    5. Fig 2: View Brake Pressure Modulator Valve (BPMV) Bracket Components
    GM1235535Courtesy of GENERAL MOTORS CORP.
  5. Carefully position aside the BPMV and bracket assembly to access the BPMV bolts.

    Support the BPMV assembly with heavy mechanics wire or equivalent.

  6. Remove the 4 BPMV bolts.
  7. Remove the BPMV bracket.
scientia non olet · About Mike's Workshop Manuals