Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> Traction Control Indicator Malfunction >> Circuit Verification

Circuit Verification

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, command the scan tool IPC display test ON and OFF. The traction control indicator should turn ON and OFF.
    • If not the specified value, replace the IPC.
  2. Observe the scan tool traction control switch parameter while pressing/depressing the traction control switch. The reading should change between active and inactive.
scientia non olet · About Mike's Workshop Manuals