Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front lower control arm assembly. Refer to Lower Control Arm Replacement .
    2. Fig 1: View Of Lower Control Arm In Soft Jawed Vise
    GM1853578Courtesy of GENERAL MOTORS CORP.
  2. Install the lower control arm in a soft jawed vise.
    3. Fig 2: Identifying Special Tools J 2619-01 & CH-48107
    GM1853579Courtesy of GENERAL MOTORS CORP.
  3. Assemble the J 2619-01  and the CH-48107  . See Special Tools .
  4. Position the J 2619-01  and the CH-48107  lower control arm bushing. See Special Tools .
  5. Using the J 2619-01  and the CH-48107  , remove the front lower control arm bushing. See Special Tools .
    6. Fig 3: Identifying Special Tool J 5590
    GM1853576Courtesy of GENERAL MOTORS CORP.
  6. Using the J 5590  , remove the rear lower control arm bushing.
scientia non olet · About Mike's Workshop Manuals