Removal Procedure

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Brake Fluid Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (1) from the brake fluid level sensor.

Fig 2: Identifying Brake Fluid Level Sensor

Courtesy of GENERAL MOTORS CORP.

Using a needle nose pliers carefully depress the retaining tabs (1) on the end of the brake fluid level sensor and press the sensor through the reservoir to remove.