Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Battery, Charging System And Starting System) >> Repair Instructions >> Engine Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating ICM Ground Strap & Bolt
    GM1662923Courtesy of GENERAL MOTORS CORP.
  1. Install the ICM ground strap (2).
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the ICM ground strap bolt (1) to the camshaft cover.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Install the ICM ground strap bolt (3) to the cylinder head.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    4. Fig 2: Identifying ICM Wiring Harness Ground
    GM1662856Courtesy of GENERAL MOTORS CORP.
  4. Install the ICM ground strap (2).
  5. Tighten the ICM ground strap bolt (1) to the camshaft cover.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  6. Install the ICM ground strap bolt (3) to the cylinder head.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  7. Install the fuel injector sight shield, if necessary. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About Mike's Workshop Manuals