Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of APP Sensor Electrical Connector
    GM1593852Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster. Refer to Knee Bolster Replacement (SKY) or Knee Bolster Replacement (Solstice) .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    3. Fig 2: Locating APP Sensor
    GM1593853Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor nuts.
  4. Remove the APP sensor from the vehicle.
scientia non olet · About Mike's Workshop Manuals