Remote Start & Personalization

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

When the Remote Start feature is activated through the key FOB, it starts up the vehicles automatic HVAC control system according to the previous settings of the system before turning the vehicle off. When the outside temperature is cold, the automatic HVAC control system will start up the rear window defogger and if the vehicle has heated seats, they will also turn on. Cooled seat are activated during a remote start. Normal operation of the automatic HVAC control system will return after the key is turned to RUN position.

If the remote start personalization feature for climate control is selected through radio, the HVAC control module will receive information that defines the current driver of the vehicle from the Remote Keyless Entry via GMLAN. This information shall be stored inside the HVAC control module memory. When a different key fob is selected, the HVAC control module will recall the appropriate driver settings. When the HVAC control module is first turned ON, the last stored settings for the current driver will be activated. Upon a battery reset, the HVAC control module shall also set the driver ID to Driver#2. The HVAC system will memorize the following system configurations for up to 2 unique drivers:

Driver set temperature
Passenger set temperature
Mode
Blower motor speed
A/C compressor request, auto ON or A/C OFF