Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Sky Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - DTC P0351 To DTC P2544 >> DTC P0685 or P0690 >> Component Testing

Component Testing

  1. Measure for 70-110 ohms between terminals 85 and 86 of the relay.
    • If the resistance is not within the specified range, replace the relay.
  2. Measure for infinite resistance between terminals 30 and 86 of the relay.
    • If continuity is detected, replace the relay.
  3. Measure for infinite resistance between terminals 30 and 87 of the relay.
    • If continuity is detected, replace the relay.
  4. Measure for infinite resistance between terminals 30 and 85 of the relay.
    • If continuity is detected, replace the relay.
  5. Measure for infinite resistance between terminals 85 and 87 of the relay.
    • If continuity is detected, replace the relay.
  6. Connect a 20A fused jumper wire from the battery positive cable at the battery, to relay terminal 85. Connect a jumper wire from the negative battery cable at the battery, to relay terminal 86. Measure for less than 2 ohms between terminals 30 and 87 of the relay, with a DMM.
    • If the resistance measures more than 2 ohms, replace the relay.
scientia non olet · About Mike's Workshop Manuals