Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Aura Green Line >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 3.6L - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Accelerator Pedal Position Sensor Components
    GM1544734Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP bolts (1) and tighten to 10 N.m (89 lb in).
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
scientia non olet · About Mike's Workshop Manuals