Radio Replacement

Fig 1: Identifying Radio

GM1791912

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel center molding panel. Refer to Instrument Panel Center Molding Replacement .
Remove the HVAC control module. Refer to HVAC Control Module Replacement .

1

Radio Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 2.5 N.m (22 lb in)

2

Radio Assembly
Tip:

Disconnect the electrical connector.
Disconnect the antenna cable.
When installing the radio verify that the locator pin on the back of the radio is firmly seated in the I/P structure extension.
Reprogram the radio after replacement. Refer to Control Module References .