Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Astra XE, Standard >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access >> Diagnostic Information and Procedures >> DTC B3265 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the liftgate release switch.
  2. Ignition ON, verify the scan tool Trunk Release Switch parameter is Inactive.
    • If not the specified value, test the signal circuit terminal 1 for a short to ground. If the circuit tests normal, replace the rear fuse block.
  3. If all circuits test normal, test or replace the liftgate release switch.