Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2009 >> Astra XE, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Windshield Wiper System Module Replacement >> Installation Procedure

Installation Procedure

    CAUTION: Refer to Fastener Caution .
  1. Install the wiper system module.

    Tighten:  Tighten the 3 bolts to 9 N.m (80 lb in).

  2. Connect the wiring harness plug.
  3. Install the windshield air inlet screen.
    • Install the hose for the windshield nozzle.
    • Install the 5 clips.
  4. Install the windshield wiper arms.
      NOTE: Ensure correct installation position of the windshield wiper arms.
    • Place the 2 windshield wiper arms on the shaft.
    • Install the 2 washers.

      Tighten:  Tighten the 2 nuts to 17 N.m (13 lb ft).

    • Install the 2 covers.
  5. Install the windshield trim seal.
  6. Adjust the wiper arms. Refer to Windshield Wiper Arm Adjustment .
scientia non olet · About Mike's Workshop Manuals