Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2008 >> Sky Red Line, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - DTC P0010 To DTC P0299 >> DTC P0013 or P0014 >> Component Testing

Component Testing

  1. Measure the resistance of CMP actuator solenoid valve assembly. Resistance should be between 8-15 ohms.
  2. Connect a jumper wire between the CMP actuator solenoid control circuit at the solenoid and a good ground. Connect a fused jumper wire to the CMP actuator solenoid ignition voltage circuit at the solenoid. Momentarily touch the fused jumper to B+. The spool valve should move from fully closed to fully opened position.
scientia non olet · About Mike's Workshop Manuals