Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2008 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 376 (Cruise Control System) >> Diagnostic Information and Procedures >> Cruise Control Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector at the steering wheel control switch-left.
  2. Cruise control switch ON, measure the resistance between terminal 4 and terminal 5 while individually activation and holding each cruise control function switch and compare the resistance reading to the values in the table below.
    • If not within the specified resistance range, replace the steering wheel control switch-left.
Function Switch Minimum Resistance Value Maximum Resistance Value
Off O.L. O.L.
On 8.1k Ohms 8.4k Ohms
- SET 1.2k Ohms 1.4k Ohms
+ RES 2.8k Ohms 3.0k Ohms
scientia non olet · About Mike's Workshop Manuals