Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2008 >> Sky Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information & Procedures >> DTC P0563 >> Circuit/System Verification

Circuit/System Verification

  1. Verify DTC P0563 is set as current.
  2. Engine running, record the voltage at the battery terminals. Observe the scan tool ECM Ignition 1 Signal parameter. Voltages should not differ by more than 2 volts.
    • If greater than specified value, replace the ECM.
scientia non olet · About Mike's Workshop Manuals