Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2008 >> Sky Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information & Procedures >> DTC C0899 >> Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC C0899 is set as current.
  2. Ignition OFF, measure the voltage at the battery terminals.
  3. Ignition ON, observe the scan tool EBCM Battery Positive Voltage parameter.
  4. Verify that battery terminal voltage and Battery Positive Voltage parameter readings do not differ by more than 2 volts.
scientia non olet · About Mike's Workshop Manuals