Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2008 >> Aura Green Line >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> Traction Control Indicator Malfunction >> Circuit Verification

Circuit Verification

  1. Ignition ON, command the scan tool IPC display test ON and OFF. The traction control indicator should turn ON and OFF.
    • If not the specified value, replace the IPC.
  2. Observe the scan tool traction control switch parameter while pressing/depressing the traction control switch. The reading should change between active and inactive.
scientia non olet · About Mike's Workshop Manuals