Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Engine Controls - 3.5L (L66) Introduction) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor 1 Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the IAT sensor with a new O-ring.
  2. Connect the IAT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
    Fig 1: View Of Intake Air Temperature (IAT) Sensor
    GM1349413Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals