Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1260 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Level Sensor Electrical Connector and Locking Tab
    GM2042219Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module assembly. Refer to Fuel Tank Fuel Pump Module Replacement .
  2. Disconnect the fuel level sensor electrical connector (1).
  3. Disengage the locking tab (2) on the fuel level sensor by pushing inward.
    4. Fig 2: Identifying the Fuel Level Sensor and Alignment Feature
    GM2042226Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel level sensor (1) from the alignment feature (2).
scientia non olet · About Mike's Workshop Manuals