Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Vue Green Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Introduction) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Mass Air Flow Sensor
    GM897187Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor to the air cleaner box with the attachment clamps. Make sure the clamps are tight.
  2. Connect the MAF sensor harness connector. Push the connector in until the lock position is felt, then pull back to confirm engagement.
scientia non olet · About Mike's Workshop Manuals