Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Vue Green Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L (Lat) - Introduction (2 Of 2) >> Repair Instructions >> Knock Sensor Replacement >> Installation Procedure

Installation Procedure

IMPORTANT: Rotate the pigtail 90 degrees from vertical before securing the fastener.
    Fig 1: Identifying Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the knock sensor.
  2. Install the knock sensor bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  3. Install the oil level indicator tube. Refer to Oil Level Indicator and Tube Replacement .
scientia non olet · About Mike's Workshop Manuals