Installation Procedure

Fig 1: View of Antenna Lead-in To Antenna Base

Courtesy of GENERAL MOTORS CORP.

Fig 2: View of Antenna Base & Fasteners

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the screws to the bracket on the antenna base.
Tighten: Tighten the screws to 10 N.m (89 lb in).

Fig 3: View of Antenna Mast Bezel

Courtesy of GENERAL MOTORS CORP.

Install the antenna bezel.
Install the antenna mast to the antenna base by turning clockwise.
Tighten: Tighten the mast to 10 N.m (89 lb in).
Install the front fender. Refer to Front Fender Replacement .