Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Saturn
>>
2007
>>
Sky Base, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 45 (Hydraulic Brake System)
>>
Repair Instructions
>>
Master Cylinder Fluid Level Sensor Replacement
>>
Installation Procedure
Installation Procedure
WARNING:
This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Master Cylinder Fluid Level Sensor
Courtesy of GENERAL MOTORS CORP.
Install the fluid level sensor (1) until the locking tabs snap into place.
Connect the electrical connector to the fluid level sensor (1).