Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Automatic Level Control Sensor Link Ball Stud Replacement (IRS) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ELC/TRAILER fuse.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: Control Sensor Link & Ball Stud
    GM1708471Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When removing the link, do NOT bend or break the sensor arm.
  3. Remove the automatic level control sensor link (1) from the ball stud.
  4. Remove the ball stud (2) from the control arm.
scientia non olet · About Mike's Workshop Manuals