Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
- Install the ball stud (2) to the control arm.
Tighten:
Tighten the ball stud to 12 N.m (106 lb in).
- Install the automatic level control sensor link (1) to the ball stud.
- Lower the vehicle.
- Install the ELC/TRAILER fuse.