Component Testing
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Driver Window Switch
- Ignition OFF, disconnect the harness connector at the driver window switch.
- Test for infinite resistance between the signal terminals G and H and the B+ circuit terminal C with the driver window switch in the INACTIVE position.
- If less than infinite resistance, replace the driver window switch.
- Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal C with the driver window switch in the UP position.
- If greater than 2 ohms, replace the driver window switch.
- Test for less than 2 ohms of resistance between the signal terminal H and the B+ circuit terminal C with the driver window switch in the DOWN position.
- If greater than 2 ohms, replace the driver window switch