Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Sky Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the ignition coil(s).
  2. Install the ignition coil bolt(s).

    Tighten:  Tighten the bolt(s) to 10 N.m (89 lb in).

    3. Fig 2: Ignition Coil Electrical Connector
    GM1591652Courtesy of GENERAL MOTORS CORP.
  3. Connect the ignition coil electrical connector(s).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About Mike's Workshop Manuals