Installation Procedure
- Route the antenna base cables through the roof opening.
- Install the antenna base to the roof.
- Secure the antenna base with the bolt.
Tighten: Tighten the bolt to 3 N.m (27 lb in).
- Connect the antenna cables to the antenna base cable connectors.
- Raise the headliner into position.
- Install the right sunshade. Refer to Sunshade Replacement .
- Fully install the right front door opening weatherstrip. Refer to Front Door Opening Weatherstrip Replacement .
- Install the right windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
NOTE:
Refer to Fastener Notice
.