Installation Procedure

Fig 1: Removing & Installing Coaxial Cable

GM914898

Courtesy of GENERAL MOTORS CORP.

Install the antenna cable retainers to the receiver bracket.

Fig 2: Identifying XM Digital Radio Receiver

GM955754

Courtesy of GENERAL MOTORS CORP.

Connect the antenna cable to the digital radio receiver.

Fig 3: Locating Cable Connectors Inside Of Instrument Panel (I/P)

GM1132274

Courtesy of GENERAL MOTORS CORP.

Install the cable connectors to the right side end cap on the I/P.

Fig 4: View Of Antenna Base Assembly

GM956421

Courtesy of GENERAL MOTORS CORP.

Install the antenna cable retainer clips.
Connect the antenna cable to the antenna base cable connector.
Install the headliner. Refer to Headlining Trim Panel Replacement .