Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Power Liftgate Inoperative >> Component Testing >> Liftgate Latch Assembly

Liftgate Latch Assembly

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a 20-amp fused jumper wire between the control terminal 1 and 12 volts. Momentarily install a jumper wire between the control terminal 3 and ground. The Liftgate Latch Assembly should perform the CINCH or RELEASE function.
    • If the function does not perform as specified, replace the Liftgate Latch Assembly.
  2. Reverse the jumper wires, the Liftgate Latch Assembly should perform the RELEASE or CINCH function.
    • If the function does not perform as specified, replace the Liftgate Latch Assembly.
scientia non olet · About Mike's Workshop Manuals