Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Repair Instructions >> Liftgate Bumper Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Passenger Side Liftgate Bumper
    GM1479952Courtesy of GENERAL MOTORS CORP.
  1. Position the bumper to the right hand body panel.
    2. NOTE: Refer to Fastener Notice .
  2. Install the screw.

    Tighten:  Tighten the screw to 10 N.m (89 lb in).

  3. Close the liftgate.
scientia non olet · About Mike's Workshop Manuals