Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Bushings Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the NEW bushing to the tapered side of the control arm.
  2. Using the J 41211 , pull the control arm bushing through the opposite direction of the control arm.
  3. Install the bushing to the same depth and orientation as noted during removal.
    4. Fig 1: Installing Control Arm Bushing
    GM851698Courtesy of GENERAL MOTORS CORP.
  4. Remove the J 41211 from the control arm.
  5. Install the control arm. Refer to Lower Control Arm Replacement .
scientia non olet · About Mike's Workshop Manuals