Installation Procedure
WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
- Install the forward pull cup hook on the door trim.
- Push down on the rearward end of the pull cup until the cup snaps into place.
- Install the pull cup screws.
Tighten: Tighten the screws to 2.5 N.m (23 lb in).
- Reposition the pull cup liner.
NOTE:
Refer to Fastener Notice in Cautions and Notices.