Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Except Redline) or Steering Column Trim Covers Replacement (Redline) .
  2. Disconnect the ignition switch harness connector.
  3. Turn the ignition switch to the run position.
    4. Fig 1: View Of Ignition Switch
    GM854768Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition switch screws.
    5. IMPORTANT: The ignition switch must be in the run position during removal.
  5. Remove the ignition switch from the steering column.
scientia non olet · About Mike's Workshop Manuals