Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers System And Washer System >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Washer Solvent Container
    GM869670Courtesy of GENERAL MOTORS CORP.
  1. Position the washer solvent container to the left frame rail.
    2. NOTE: Refer to Fastener Notice .
  2. Install the washer solvent container screw.

    Tighten:  Tighten the screw to 10 N.m (89 lb in).

  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose.
  5. Install the front fender liner. Refer to Front Fender Liner Replacement .
  6. Fill the washer solvent container with washer solvent.
scientia non olet · About Mike's Workshop Manuals