Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Ion 2 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Antilock Brake System With Traction Control System) >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion Red Line, 2006 Saturn Ion 3, and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Traction Control Switch
GM891945Courtesy of GENERAL MOTORS CORP.
  1. Install the traction control switch (1) to the accessory trim plate. Ensure that the retaining tabs are fully engaged.
  2. Install the instrument panel (I/P) accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gages and Console.
scientia non olet · About Mike's Workshop Manuals