Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Ion 2 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Cellular Communication System) >> Repair Instructions >> Bracket Assembly Replacement - OnStar Module >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion Red Line, 2006 Saturn Ion 3, and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Vehicle Communication Interface Module
GM888377Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear shelf trim. Refer to Trim Panel Replacement - Rear Window Shelf (Late Production) in Interior Trim.
  2. Remove the CIM from the bracket by pulling back on the bracket tabs.
  3. Remove the OnStar® bracket screw.
  4. Remove the OnStar® bracket from the rear shelf.
scientia non olet · About Mike's Workshop Manuals