Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2007 >> Aura Green Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating MAP Sensor
    GM1889727Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the NEW MAP sensor seal with clean engine oil.
  2. Install the MAP sensor (1) into the intake manifold.
    3. Fig 2: Identifying Fuel Injector Wiring Harness & Connectors
    GM1889726Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel injector wiring harness.
  4. Connect the fuel injector wiring harness electrical connectors (2) to the fuel injectors.
  5. Install the fuel injector wiring harness clips (1) to the fuel rail tabs.
    6. Fig 3: View Of Fuel Injector Wiring Harness Electrical Connector
    GM1889725Courtesy of GENERAL MOTORS CORP.
  6. Connect the fuel injector wiring harness electrical connector (1) to the MAP sensor.
    7. Fig 4: View Of Fuel Injector Wiring Harness Electrical Connector & Clip
    GM1889723Courtesy of GENERAL MOTORS CORP.
  7. Connect the engine wiring harness electrical connector (3) to the fuel injector wiring harness electrical connector (4).
  8. Install the fuel injector wiring harness electrical connector clip (1) to the engine wiring harness clip (2).
    9. Fig 5: View Of EVAP Canister Purge Tube
    GM1889722Courtesy of GENERAL MOTORS CORP.
  9. Position the EVAP canister purge tube (1) out of the way.
  10. Connect the EVAP canister purge tube to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  11. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
scientia non olet · About Mike's Workshop Manuals