Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Intake Manifold Tuning Valve Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Harness electrical Connector
    GM1675736Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the engine harness electrical connector (1) from the intake manifold tuning valve.
  3. Remove the power steering pump. Refer to Power Steering Pump Replacement .
    4. Fig 2: Removing/Installing Intake Manifold Tuning Valve Bolts
    GM1557831Courtesy of GENERAL MOTORS CORP.
  4. Remove the intake manifold tuning valve bolts.
  5. Remove the intake manifold tuning valve.
scientia non olet · About Mike's Workshop Manuals