Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Crankshaft Position (CKP) Sensor
    GM1712672Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (RPO LX9) or Exhaust Manifold Replacement - Right Side (RPO LZ9) .
  2. Disconnect the engine harness electrical connector from the crankshaft position (CKP) sensor.
  3. Remove the CKP sensor stud (2).
  4. Remove the CKP sensor (1).
scientia non olet · About Mike's Workshop Manuals