Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Door Latch Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door modules (PSDM) will be interrupted and both PSDs will be inoperative.
  1. If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
  2. Remove the sliding door inner trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the sliding door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Fig 1: Replacing Sliding Door Latch
    GM1480602Courtesy of GENERAL MOTORS CORP.
  5. Remove the sliding door latch screws.
  6. Remove the sliding door latch from the sliding door.
  7. When the sliding door latch is loose, unhook the latch/lock rod form the sliding door latch.