Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2006 >> Relay 3.5 L, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Diagnostic Information and Procedures >> Remote Vehicle Start Inoperative >> Component Testing

Component Testing

Hood Ajar Switch

  1. Ignition OFF, disconnect the harness connector at the hood ajar switch.
  2. Test for infinite resistance between the signal circuit terminal A and the ground circuit terminal B with the switch in the open position.
    • If not the specified value, replace the hood ajar switch.
  3. Test for less than 2.0 ohms of resistance between the signal circuit terminal A and the ground circuit terminal B with the switch in the closed position.
    • If greater than the specified range, replace the hood ajar switch.
  4. Test for infinite resistance between each terminal and the hood ajar switch housing.
    • If not the specified value, replace the hood ajar switch.
scientia non olet · About Mike's Workshop Manuals